Hoover Agitator Drive Belt : 3M-201-6

Product Description

If the agitator brush on your vacuum cleaner has stoped spinning, it could be a problem with the belt. If the belt has snapped or worn out then this is the ideal replacement. Learn more about vacuum belts below:

What does the vacuum belt do?

The vacuum belt is a key component of an upright vacuum cleaner. Its primary function is to turn the agitator brush bar, which is used to beat dirt and dust out of the carpets. Vacuum belts are made of rubber and they are stretched between the motor pulley, which powers the belt, and the brush bar/agitator.

Is a faulty belt causing the problem?

The following faults typically indicate a problem with the vacuum belt:

The vacuum is on but it doesn't seem to pick up
The vacuum has the smell of burnt rubber
The vacuum cleaner has become harder to push
The brush roll/agitator has stopped spinning
*Remember that a snapped or loose vacuum belt is the most likely cause, but this may not be the only fault that can cause these issues to arise

When should you replace a vacuum belt?

Vacuum belts need to be replaced as soon as they become damaged. They are designed to snap if the brush roll becomes blocked in order to protect the motor. To ensure that your vacuum cleaner maintains effective performance it is usually suggested that you replace the belt around every 4 - 6 months as they can easily become stretched. It is also recommended that you keep a spare vacuum belt in the cupboard, so you are prepared.

Please check model fit list to ensure this part is correct for your model.

Manufacturers Part Number

• 35601892

EAN

• 8016361949836